Table of Contents
Advertisement
8. Install the replacement riser card, if desired.
9. Install the PCIe* Riser assembly into the server system.
10. Install the server system cover. For instructions, see
Cover".
11. Plug all peripheral devices and the AC power cable into the server.
Installing a PCIe* Riser Card
1. Observe the safety and ESD precautions at the beginning of this book. See
Information".
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
System
4. Disconnect any cables attached to any add-in cards.
5. Remove the PCIe* Riser assembly.
6. Remove any add-in cards from the PCIe* Riser connector. For instructions, see
"Removing a PCI Add-in
7. Use the screw to attach the riser card to the riser assembly.
46
Figure 29. Removing Riser Assembly
Cover".
Card".
EP0001
"Installing the Server System
"Removing the Server
®
Intel
Server System SR1695GPRX Service Guide
"Safety
Advertisement
Table of Contents
