T1600 Switch Interface Board (Sib) Overview; T1600 Switch Interface Board (Sib) Description - Juniper T1600 Hardware Manual

T1600 Core Router Hardware Guide

T1600 Switch Interface Board (SIB) Overview

T1600 Switch Interface Board (SIB) Description

32
The rear cable management system consists of one cable management arm as shown
in Figure 19 on page 32.
Figure 19: T1600 Rear Cable Management System
Rear cable
management
system
T1600 Switch Interface Board (SIB) Description on page 32
T1600-SIB Description on page 33
T1600-SIB LEDs on page 34
TXP-T1600 SIB Description on page 34
TXP-T1600 SIB LEDs on page 35
SIBs create the switch fabric for the T1600 Core Router. Each T1600 router contains five
SIBs located at the center rear of the chassis in the slots labeled
to bottom). One of the five SIBs acts as a backup to the remaining four SIBs. If a SIB fails,
the backup SIB becomes active, and traffic forwarding continues without any degradation.
SIB0 through SIB4
Copyright © 2010, Juniper Networks, Inc.
(top