T1600 General Laser Safety Guidelines; Laser Safety Warnings For M Series, Mx Series, And T Series Routers; Class 1 Laser Product Warning - Juniper T1600 Hardware Manual

T1600 Core Router Hardware Guide

T1600 General Laser Safety Guidelines

Related
Documentation

Laser Safety Warnings for M Series, MX Series, and T Series Routers

322
Devices with single-mode optical interfaces are equipped with laser transmitters, which
are considered a Class 1 Laser Product by the U.S. Food and Drug Administration, and
are evaluated as a Class 1 Laser Product per EN 60825–1 +A11 +A2 requirements.
When working around devices with optical interfaces, observe the following safety
guidelines to prevent eye injury:
Do not look into unterminated ports or at fibers that connect to unknown sources.
Do not examine unterminated optical ports with optical instruments.
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laser
radiation. The lens in the human eye focuses all the laser power on the
retina, so focusing the eye directly on a laser source—even a low-power
laser—could permanently damage the eye.
T1600 Router Description on page 3
General Safety Guidelines for M Series, MX Series, and T Series Routers on page 309
T1600 Site Preparation Requirements Checklist on page 75
Class 1 Laser Product Warning on page 322
Class 1 LED Product Warning on page 323
Laser Beam Warning on page 323
Radiation from Open Port Apertures Warning on page 324

Class 1 Laser Product Warning

WARNING: Class 1 laser product.
Waarschuwing Klasse-1 laser produkt.
Varoitus Luokan 1 lasertuote.
Attention Produit laser de classe I.
Warnung Laserprodukt der Klasse 1.
Avvertenza Prodotto laser di Classe 1.
Advarsel Laserprodukt av klasse 1.
Aviso Produto laser de classe 1.
Copyright © 2010, Juniper Networks, Inc.