T1600 Midplane Description - Juniper T1600 Hardware Manual

Hide thumbs Also See for T1600:

Table of Contents

T1600 Core Router Hardware Guide

Documentation

T1600 Midplane Description

Figure 7: Rear View of Router Chassis

For chassis serial number information , see "Locating T1600 Component Serial Numbers

Using the CLI" on page 373.

T1600 Router Description on page 3

Rack Requirements for the T1600 Router on page 76

Installing the T1600 Chassis in the Rack Manually on page 112

Mounting the T1600 Chassis Using a Mechanical Lift on page 98

General Safety Guidelines for M Series, MX Series, and T Series Routers on page 309

The midplane is located in the center of the chassis and forms the rear of the FPC card

cage (see Figure 8 on page 17). The FPCs install into the midplane from the front of the

chassis, and the SIBs, Routing Engines, and control boards and SCGs install into the

Table of Contents