Error Messages - Brother HL-2400C Service Manual

USER'S GUIDE

Error Messages

Error Message
32 BUFFER ERROR
34 MEMORY FULL
40 LINE ERROR
41 PRINT CHECK
6–4
Meaning
Input buffer overflow
Work memory overflow
Error in the communications
circuit
Error in communication with
the engine controller
Action
Reset the printer or turn off
and on the printer.
Press the Continue button to
resume printing. If the same
error should occur after you
press the Continue button,
turn off the printer. Wait a few
seconds, then turn it on again.
Reduce the input buffer size.
Turn off "KEEP PCL." Add
SIMM memory with printer
power off. Download font and
the fonts saved in the HDD
card might cause the error, for
these occupy the same work
area as the RAM. Memory
expansion is recommended in
that case.
When the serial interface is
used, check the
communications parameters
such as baud rate, code type,
parity, and handshake
protocols. When the parallel
interface is used, check the
interface cable connection.
Turn off the printer. Wait a
few seconds, then turn it on
again.