Brother HL-2400C Service Manual page 430

USER'S GUIDE
4–36
Save
When you select "SAVE" and you press the Set button, you can enter
the following sub-setting menus to save the macros and fonts in the
installed card:
Display Message
SAVE DATA
SAVE MACRO
PRIMARY FONT
SECONDARY FONT
DOWNLOAD FONT
Note
If the capacity of the card becomes low while macros and fonts are being
saved, the display shows the "CARD FULL" error message and they
cannot be saved. Use a new card or delete unnecessary macros and fonts
from the card. The CARD LIST displays the contents and the used
capacity.
• Save Data
You can send data and save it on the card. In this mode, any kind of data
such as PCL data, BR-Script 2 data, and command strings can be saved.
When you select "SAVE DATA" and you press the Set button, the
display shows the guide menu.
The guide menu message prompts you to press the Set button again so
that the printer exits from the data reception status when you have
finished sending data.
Send the data from your computer and then press the Set button.
Save Menu
Save data that the printer will receive and
set its ID.
Save a macro. This menu appears only in
the HP PCL5C emulation mode.
Save the primary font selected with the
Font button. This menu appears only in the
HP PCL5C emulation mode.
Save the secondary font selected with the
Font button. This menu appears only in the
HP PCL5C emulation mode.
Save a download font. This menu appears
only in the HP PCL5C emulation mode.