Paper Exit Roller; Paper Exit Sensor (Pt2) - Brother HL-2400C Service Manual

4.4.5

Paper Exit Roller

1) Remove the C ring, washer, and plastic bush from the left and right hand sides.
2) Remove the shaft support at both sides.
3) Remove the paper exit roller from the paper exit guide.
Paper Exit Roller
4.4.6

Paper Exit Sensor (PT2)

1) Disconnect the harnesses connected to the paper exit sensor.
2) Remove the paper exit sensor from the paper exit guide.
Paper Exit Sensor
Paper exit guide
Fig.7-62
Paper exit guide
Fig.4-63
VII-37