Advanced Mode; Network Mode - Brother HL-2400C Service Manual

• Format Card
You can format the flash memory card or HDD card to delete its contents.
Instructions are in the following menu:
When you press the Set button in this menu, the printer asks if you want
to delete all contents of the card. Then press the Set button to start
formatting the card.
When you want to cancel formatting, move to the following menu with
the

ADVANCED MODE

NETWORK MODE

Display Message
LOCK PANEL=OFF
AUTO FF=ON
FF SUPPRESS=OFF
Lock panel
If someone other than you has changed the panel button settings and you
do not know about it, the printer may not print as you expected or it may
not print at all.
To cope with this problem, you can lock or unlock the panel buttons with
your pass number as follows:
Display Message
LOCK=OFF
LOCK=ON
Even if you lock the panel buttons, you can still use the Sel, Form
Feed, Copy, Continue, Reset and Test buttons for their normal
functions. You can only check the settings of the other buttons, you
cannot change them. To change them, you need to first unlock the panel
buttons.
FORMAT CARD
button and press the Set button.
or
Network Mode
Turns on or off lock panel function.
Turns on or off auto form feed.
Turns on or off the form feed suppress
function.
Lock Panel
Unlock the panel buttons of the printer.
(Factory setting)
Lock the panel buttons of the printer.
CHAPTER 4 CONTROL PANEL
4–41