Using The Fax Driver; Installing The Fax Driver; Receiving Fax Messages - Brother HL-2400C Service Manual

USING THE FAX DRIVER

Installing the Fax Driver

Windows 3.1
1. Choose the RUN command from the FILE menu in the Program Manager.
2. Type A:\SETUP and press the ENTER key.
Windows 95 / Windows 98 / Windows NT 4.0
1. Click Start, and select Printers from the Settings menu.
2. Click the Add printer icon in the Printers folder.
3. Follow the instructions that appear on the screen. If you have already created a
network share on your file server, specify the share name on your file server.
!
Caution
When installing the fax driver in Windows NT 4.0, be sure to install it as a "Local
Printer" in Add Printer Wizard. You should select the network port after installing the
fax driver if you want to use it as a network printer. If you install the fax driver as a
"Network Printer", it will not work.

Receiving Fax Messages

When the printer power is on, the printer automatically receives fax data through the
External Fax Modem and prints the data. The 'FAX RECEIVING' message appears
while the printer is receiving data.
You can also make a setting on the control panel to not receive fax data. For details,
refer to 'Settings on the Control Panel'
!
Caution
When the 'FAX RECEIVING' message appears on the control panel, do not turn off the
printer as this will result in the fax data not being completely received.
in this manual.
-7-
OPERATION MANUAL