Brother HL-2400C Service Manual page 317

Color laser printer

Hide thumbs Also See for HL-2400C:

Table of Contents

1) Re-install the fusing unit into the

i) After setting the fusing unit in place,

lightly press down the unit to firmly

connect to the connector on the

ii) Tighten the securing screws while

pressing down the fusing unit.

Check the metal hook of the screw

at the left hand secures the fusing

unit correctly.

iii) Close the rear access cover and

2) Check the following items are packed

in the starter kit packing;

Four toner cartridges (K, Y, M, C),

OPC belt cartridge, Oil bottle, Fuser

cleaner. (Refer to the figure as shown

on the right.)

3) Put the printer into the polyethylene

4) Pack the printer, the starter kit packing,

the waste toner pack, and power cable

in the carton using the original packing

5) Seal the outer carton firmly.

Starter Kit Packing

Outer Carton

Starter Kit Packing

Toner Cartridge

Chapters

Table of Contents