Brother HL-2400C Service Manual page 139

Code No.
18-1 CLOSE PANEL
18 CLOSE PANEL
18-2 SET TR.UNIT
18 CLOSE TR.UNIT
19 SLEEP MODE
19 SLEEP MODE
20 SERVICE CALL
20 SERVICE CALL
LCD Message
[*8] [*4]
[*4]
[*4]
[*9]
V-18
Description of Message
The engine is in standby.
The Ready LED is lit.
[*8]: The open cover is indicated as
follows;
FRONT: Front Cover
TOP: Paper Exit Cover
This message can be cleared by
opening & closing the indicated cover.
The engine is stopped.
The Ready LED is lit.
The transfer unit is open. Reconfirm
the installation status of the transfer
unit.
This message can be cleared by
opening and closing the rear access
cover.
The engine is idling.
The Ready LED is lit.
This mode is cleared by sending a
WAKE-UP command (EC24) from the
video controller.
The printer is ready to print after the
warming-up process of the engine.
The engine is in standby.
The Ready LED is lit.
[*9]: Service Call error code is indicated
as follows;
For the details of error codes, refer
to Chapter VIII "Troubleshooting" in
this manual.