4.1.15 Ozone Fan (OZFAN)
1) Remove the lower set screw ST3X6 (1 pc.) from the fan case assembly. (Fig.7-20)
2) Remove the fan case assembly.
3) Remove the ozone fan from the fan case. (Fig.7-21)
4.1.16 Toner Sensor Assembly (TPD)
1) Remove the set screws ST3X6 (3 pcs.) from the toner sensor PCB.
2) Disconnect the connector to the toner sensor PCB.
Note:
If the optional lower tray unit is fitted, remove the left hand screw of the front cross rail to
release the media cassette guide.
Fig.7-20
VII-15
Fig.7-21
Toner Sensor
(TPD)
Fig.7-22
Ozone Fan
Fan case