Fuser Cleaner; Fuser Cleaner Message; Fuser Cleaner Change Message; Replacing The Fuser Cleaner - Brother HL-2400C Service Manual

Fuser Cleaner

Fuser Cleaner Message

When the following message appears on the LCD panel, you need to
prepare a new Fuser Cleaner.

Fuser Cleaner Change Message

When the following message appears on the LCD panel and the printer
stops printing, you need to replace the Fuser Cleaner.

Replacing the Fuser Cleaner

The Fusing unit and the parts around it are HOT. Be sure to wait
about 30 minutes before you start replacing the Fuser Cleaner.
If you touch the HOT parts, you might get injured.
1. Press the Power button to turn the printer off and wait until it cools
down for approximately 30 minutes.
2. Open the Top cover.
3. Release the Oil Bottle Lock Levers on both sides as shown below.
REPLACE FCR
24 CHANGE FCR
Warning
Fig. 5-6 Release the Levers
CHAPTER 5 MAINTENANCE
5-9