Installing The Oil Bottle And The Fuser Cleaner - Brother HL-2400C Service Manual

Installing the Oil Bottle and the Fuser Cleaner

1. Release the Fusing unit pressure a little with the Pressure Release
Levers (
of the Fusing Unit out to remove them (
Pressure Release Levers are locked.
2. Install the Oil Bottle into the Fusing Unit with the label side facing the
front of the printer.
!
Caution
Do not spill the oil inside the printer. If the oil does spill, it might cause
damage to the printer. If you do spill any oil, consult your dealer or our
authorized service representative.


). Then pull the orange protective parts between the rollers
Fig. 2-13 Remove the Protective Parts
Fig. 2-14 Install the Oil Bottle
CHAPTER 2 SETTING UP THE PRINTER

). Make sure that the
2–9