Oil Bottle; Oil Bottle Low Message; Oil Bottle Empty Message; Replacing The Oil Bottle - Brother HL-2400C Service Manual

USER'S GUIDE

Oil Bottle

Oil Bottle Low Message

Oil Bottle Empty Message

Replacing the Oil Bottle

5-6
When the Oil has nearly run out, the following message appears on the
LCD panel. You need to prepare a new Oil Bottle to replace the nearly
empty bottle. After this message appears, you can print approximately 30
pages.
FUSER OIL LOW
When the Oil runs out, the following message appears on the LCD panel
and the printer stops printing. When you see this message, you need to
replace the Oil Bottle with a new one.
23 OIL EMPTY
Warning
The Fusing unit and the parts around it are HOT. Be sure to wait
about 30 minutes before you start replacing the Oil Bottle.
If you touch the HOT parts, you might get injured.
!
Caution
Be careful not to spill the oil inside the printer. It might cause damage to
the printer and void your warranty. If you spill any oil, consult your
dealer or our authorized service representative.
1. Press the Power button to turn the printer off and wait until it cools
down.
2. Open the Top cover.