Toner Save Mode / Power Save Mode - Brother HL-2400C Service Manual

2.2

Toner Save Mode / Power Save Mode

The toner save mode allows you to reduce the printer running cost and improve the life
expectancy of the toner cartridge.
The power save mode allows you to save electricity when the printer is on but not being
used.
<Procedure>
1) Turn on the printer to enter normal mode.
2) Press the Shift and Economy buttons at the same time.
3) The display shows the menu as follows;
4) Select the toner save mode or the power save mode using the scroll buttons or by
pressing the Shift and Economy buttons again. Then, press the Set button.
5) Select the setting (ON/OFF) with the scroll buttons, then press the Set button.
6) When turning on the power save mode, the display shows the next sub-setting
menu as follows;
7) You need to set the time out from 1 to 99 minutes with the scroll buttons. (The
factory setting is 30 minutes.)
Note:
The time out is the duration after which the fusing unit of the print engine is turned off to
save power.
E C O N O M Y
T O N E R S A V E M O D E
P O W E R S A V E = O N
T I M E O U T = 3 0 m
V-3