Brother HL-2400C Service Manual page 141

31 GRID PRINT
A single color or two color (R,G,B) Grid Pattern and a full color Stripe Pattern can be
printed as Test Prints.
Procedure
Description of Procedures
1) Press the Continue button.
2) Using the Set or
pattern (ex. grid pattern), and then press the
Continue button.
3) Using the Set or
color (ex. red color), and then, press the
Select button.
4) After completion of the warming-up process,
the desired pattern of the selected color will
be continuously printed.
5) Print operation is suspended by pressing the
Font button.
If it is desired to return to the previous screen
(message), press the Font button one more
time.
6) If it is desired to return to On-line mode,
press the On Line button. (f)
(a) (b)
button, select the desired
(b) (c)
button, select the desired
(c) (d)
(d)
(d) (e)
(e) (d)
(g)
V-20
LCD Message
SERVICE MODE
a)
TEST PRINT/NEXT
31 GRID PRINT
b)
GRID PRINT/STRIPE
31 GRID PRINT
c)
Y/M/C/K/R/G/B
R:YM
G:YC
B:MC
31 GRID PRINT [YM]
d)
U:[ ] L:[ ]
31 GRID PRINT
e)
Y/M/C/K/R/G/B
SERVICE MODE
f)
TEST PRINT
01 WAIT [
g)
U:[ ] L:[ ]
[ ]
]
[ ]