Engine Controller Mode - Brother HL-2400C Service Manual

Display Message
44 SIMM ERROR
45 MIO ERROR
47 CARD1(2)R ERROR
XX SIZE ERROR
IGNORE DATA
2.2

Engine Controller Mode

The Ready LED is lit, and applicable messages appear on the liquid crystal display (LCD)
in the following cases;
1) Consumables require to be replenished.
2) Waste toner pack is full of waste toner.
3) Paper jam.
4) Periodic maintenance.
5) Maintenance work being incomplete.
The above cases are not regarded as a breakdown, and should be treated in accordance
with Table 8-2;
Display Message
11 NO MEDIA UPP/LOW
11 CHK MEDIA
UPP/LOW
12 NO TRAY UPP/LOW
13 REPLACE TONER
Y/M/C/K
14 CHECK WASTE
TONER
14 CHECK FUSER OIL
Meaning
Incorrect installation
of SIMMs
Error in
communication with
the MIO card
Card read error
Paper of incorrect size
is loaded into XX. XX
is T1/2.
Data is ignored
because of an error in
the PostScript
language program.
Table 8-2
Meaning
No paper in the upper
cassette / lower
cassette
Inconsistency of
media
No upper / lower
media cassette
Toner (Y, M, C, K)
empty
Waste toner pack full
of toner
Change the oil bottle
VIII-6
Countermeasure
Install SIMMs correctly,
referring to the printed error
message.
Install the MIO card correctly.
Use a new card. If the same
error occurs, consult your
dealer or service personnel.
Set the correct size of paper
in T1/2.
Press the Reset button. If the
same error occurs, you may
need to add optional SIMM
memory.
Countermeasure
Replenish paper.
Change media.
Install cassette(s).
Replace with new toner
cartridge(s).
Replace with a new waste
toner pack.
Replace with a new oil bottle.