Configuring An Ldap Server With Yast - Novell LINUX ENTERPRISE SERVER 10 SP2 - INSTALLATION AND ADMINISTRATION Installation Manual

The -b option determines the search base—the section of the tree within which the
search should be performed. In the current case, this is dc=example,dc=com. To
perform a more finely-grained search in specific subsections of the LDAP directory
(for example, only within the devel department), pass this section to ldapsearch
with -b. -x requests activation of simple authentication. (objectClass=*) declares
that all objects contained in the directory should be read. This command option can be
used after the creation of a new directory tree to verify that all entries have been
recorded correctly and the server responds as desired. Find more information about the
use of ldapsearch in the corresponding man page (ldapsearch(1)).
36.4.4 Deleting Data from an LDAP
Directory
Delete unwanted entries with ldapdelete. The syntax is similar to that of the other
commands. To delete, for example, the complete entry for Tux Linux, issue the fol-
lowing command:
ldapdelete -x -D cn=Administrator,dc=example,dc=com -W cn=Tux \
Linux,ou=devel,dc=example,dc=com
36.5 Configuring an LDAP Server with
YaST
Use YaST to set up an LDAP server. Typical use cases for LDAP servers include the
management of user account data and the configuration of mail, DNS, and DHCP
servers.
LDAP—A Directory Service 683