Sax2 - Novell LINUX ENTERPRISE SERVER 10 SP2 - INSTALLATION AND ADMINISTRATION Installation Manual

8.14 SaX2

Configure the graphical environment of your system with Hardware > Graphics Card
and Monitor. This opens the SUSE Advanced X11 Configuration interface (SaX2),
where you can configure devices such as your mouse, keyboard, or display devices.
This interface can also accessed from the GNOME main menu with Computer > More
Applications > System > Sax2 or the KDE main menu with System > Configuration >
SaX2.
8.14.1 Card and Monitor Properties
Adjust the settings for your graphics card and display device in Card and Monitor
Properties. If you have more than one graphics card installed, each device is shown in
a separate dialog reachable by a tab. At the top of the dialog, see the current settings
for the selected graphics card and the monitor that is attached to it. If more than one
screen can be connected to the card (dual head), the monitor on the primary output is
shown. Normally, the card and display device are detected automatically by the system
during installation. However, you can tune many parameters manually or even change
the display device completely.
Figure 8.11 Card and Monitor Properties
System Configuration with YaST 191