Figure 34.4 DHCP Server: Start-Up
Host Management
Instead of using dynamic DHCP in the way described in the preceding sections,
you can also configure the server to assign addresses in quasi-static fashion. To do
so, use the entry fields provided in the lower part to specify a list of the clients to
manage in this way. Specifically, provide the Name and the IP Address to give to
such a client, the Hardware Address, and the Network Type (token ring or ethernet).
Modify the list of clients, which is shown in the upper part, with Add, Edit, and
Delete from List. See Figure 34.5, "DHCP Server: Host Management" (page 647).
646
Installation and Administration