Novell LINUX ENTERPRISE SERVER 10 SP2 - INSTALLATION AND ADMINISTRATION Installation Manual page 90

4.3.4 PXELINUX Configuration Options
The options listed here are a subset of all the options available for the PXELINUX
configuration file.
DEFAULT kernel options...
Sets the default kernel command line. If PXELINUX boots automatically, it acts
as if the entries after DEFAULT had been typed in at the boot prompt, except the
auto option is automatically added, indicating an automatic boot.
72 Installation and Administration
# apic
label apic
kernel linux
append initrd=initrd ramdisk_size=65536 apic insmod=e100 \
install=nfs://ip_instserver/path_instsource/product/CD1
# manual
label manual
kernel linux
append initrd=initrd ramdisk_size=65536 manual=1
# rescue
label rescue
kernel linux
append initrd=initrd ramdisk_size=65536 rescue=1
# memory test
label memtest
kernel memtest
# hard disk
label harddisk
localboot 0
implicit 0
display message
prompt 1
timeout 100
Replace ip_instserver and path_instsource with the values used in
your setup.
The following section serves as a short reference to the PXELINUX options used
in this setup. Find more information about the options available in the documen-
tation of the syslinux package located under /usr/share/doc/
packages/syslinux/.