Novell LINUX ENTERPRISE SERVER 10 SP2 - INSTALLATION AND ADMINISTRATION Installation Manual page 238

3 The Patch Download and Installation dialog tracks the progress log. When Total
4 Once restarted, press Accept to apply all available updates together with a new
5 In the restarted Online Update you now should scroll down the patch list and
6 The Patch Download and Installation dialog tracks the progress log of the migra-
7 Start YaST Online Updates again. Apply the product-sles10-sp2 and
8 Click Close to finish the update to SUSE Linux Enterprise 10 SP2 and reboot.
Starting with zen-updater
For background information about ZENworks, see Chapter 9, Managing Software with
ZENworks (page 199).
Before initiating the online update using zen-updater to progress to the SP feature level,
make sure that the requirements are met as listed in Section "Starting with YaST Online
Update" (page 218).
220 Installation and Administration
SUSE Linux Enterprise 10 SP2 maintenance stack update (slesp1u-libzypp)
are actually preselected. Then press Accept to apply the selected updates.
Progress reaches 100%, click Close. The Online Update will then restart auto-
matically.
kernel. When installed, you must reboot the system.
select Update to Service Pack 2 (move-to-sles10-sp2) as shown in Fig-
ure 10.2, "Update to Service Pack 2" (page 219). In the pop-up window, click
Accept to confirm the start of the update procedure to the service pack feature
level.
The move-to-sles10-sp2 patch is marked optional. If you do not select
it, your system will stay at the SP1 feature level and you will get bug fixes and
security updates only for a limited time (six month after the availibility of SP2).
tion patch installation. When Total Progress reaches 100%, click Finish.
slesp2o-sp2_online patch to bring the system to the SP2 level. Both these
patches are preselected because they are mandatory, if you installed
move-to-sles10-sp2 during the steps before.