Figure 34.3 DHCP Server: Dynamic DHCP
Finishing the Configuration and Setting the Start Mode
After the third part of the configuration wizard, a last dialog is shown in which you
can define how the DHCP server should be started. Here, specify whether to start
the DHCP server automatically when the system is booted or manually when
needed (for example, for test purposes). Click Finish to complete the configuration
of the server. See Figure 34.4, "DHCP Server: Start-Up" (page 646). Alternatively,
you can select Host Management from the tree structure to the left to configure
special host management features in addition to the basic configuration (see Fig-
ure 34.5, "DHCP Server: Host Management" (page 647)).
DHCP
645