Novell LINUX ENTERPRISE SERVER 10 SP2 - INSTALLATION AND ADMINISTRATION Installation Manual page 95

4.4.1 Using the Default Boot Options
The boot options are described in detail in Chapter 3, Installation with YaST (page 17).
Generally, just selecting Installation starts the installation boot process.
If problems occur, use Installation—ACPI Disabled or Installation—Safe Settings. For
more information about troubleshooting the installation process, refer to Section 51.2,
"Installation Problems" (page 916).
4.4.2 Using the F Keys
The menu bar at the bottom screen offers some advanced functionality needed in some
setups. Using the F keys, you can specify additional options to pass to the installation
routines without having to know the detailed syntax of these parameters (see Sec-
tion 4.4.3, "Using Custom Boot Options" (page 78)).
See the table below for a complete set of the options available.
Table 4.1 F Keys During Installation
Key Purpose
F1 Provide help
F2 Select the installation
language
F3 Change screen resolu-
tion for installation
Available Options
None
All supported languages
• Text mode
• VESA
• resolution #1
• resolution #2
• ...
Default Value
None
English
• Default value
depends on
your graphics
hardware
Remote Installation 77