Figure 3.1 IBM System z: Selecting a DASD
Now specify the DASDs to use for the installation by selecting the corresponding entries
in the list then clicking Select or Deselect. After that, activate and make the DASDs
available for the installation by selecting Perform Action > Activate. See Figure 3.2,
"IBM System z: Activating a DASD" (page 25). To format the DASDs, select Perform
Action > Format right away or use the YaST partitioner later as described in Sec-
tion 8.5.7, "Using the YaST Partitioner" (page 155).
Figure 3.2 IBM System z: Activating a DASD
Installation with YaST
25