Novell LINUX ENTERPRISE SERVER 10 SP2 - INSTALLATION AND ADMINISTRATION Installation Manual page 70

5 Initiate the boot process of the target system using Wake on LAN. This is de-
6 On the controlling workstation, open a VNC viewing application or Web
7 Perform the installation as described in Chapter 3, Installation with YaST
8 Finish the installation.
4.1.4 Simple Remote Installation via
This type of installation still requires some degree of physical access to the target system
to boot for installation and to determine the IP address of the installation target. The
installation itself is entirely controlled from a remote workstation using SSH to connect
to the installer. User interaction is required as with the regular installation described in
Chapter 3, Installation with YaST (page 17).
For this type of installation, make sure that the following requirements are met:
• Remote installation source: NFS, HTTP, FTP, or SMB with working network
connection
• Target system with working network connection
• Controlling system with working network connection and working SSH client
software
• Physical boot medium (CD, DVD, or custom boot disk) for the target system
• Valid static IP addresses already assigned to the installation source and the control-
ling system
• Valid static IP address to assign to the target system
52 Installation and Administration
scribed in Section 4.3.7, "Wake on LAN" (page 75).
browser and connect to the target system as described in Section 4.5.1, "VNC
Installation" (page 81).
(page 17). Reconnect to the target system after it reboots for the final part of the
installation.
SSH—Static Network Configuration