Novell LINUX ENTERPRISE SERVER 10 SP2 - INSTALLATION AND ADMINISTRATION Installation Manual page 28

Simple Remote Installation via VNC—Dynamic Network Configuration (page 11)
Consider this approach in a small to medium scenario with dynamic network setup
through DHCP. A network, network installation server, and VNC viewer application
are required.
Remote Installation via VNC—PXE Boot and Wake on LAN (page 12)
Consider this approach in a small to medium scenario that should be installed via
network and without physical interaction with the installation targets. A network,
a network installation server, network boot images, network bootable target hard-
ware, and a VNC viewer application are required.
Simple Remote Installation via SSH—Static Network Configuration (page 12)
Consider this approach in a small to medium scenario with static network setup.
A network, network installation server, and SSH client application are required.
Remote Installation via SSH—Dynamic Network Configuration (page 13)
Consider this approach in a small to medium scenario with dynamic network setup
through DHCP. A network, network installation server, and SSH client application
are required.
Remote Installation via SSH—PXE Boot and Wake on LAN (page 13)
Consider this approach in a small to medium scenario that should be installed via
network and without physical interaction with the installation targets. A network,
a network installation server, network boot images, network bootable target hard-
ware, and an SSH client application are required.
Simple Mass Installation (page 14)
Consider this approach for large deployments to identical machines. If configured
to use network booting, physical interaction with the target systems is not needed
at all. A network, a network installation server, a remote controlling application
such as a VNC viewer or an SSH client, and an AutoYaST configuration profile
are required. If using network boot, a network boot image and network bootable
hardware are required as well.
Rule-Based Autoinstallation (page 15)
Consider this approach for large deployments to various types of hardware. If
configured to use network booting, physical interaction with the target systems is
not needed at all. A network, a network installation server, a remote controlling
application such as a VNC viewer or an SSH client, and several AutoYaST confi-
guration profiles as well as a rule setup for AutoYaST are required. If using network
boot, a network boot image and network bootable hardware are required as well.
10 Installation and Administration