Graphical Login - Novell LINUX ENTERPRISE SERVER 10 SP2 - INSTALLATION AND ADMINISTRATION Installation Manual

TIP: Resetting Hardware Configuration to Defaults
You can cancel changes by clicking Change > Reset to Defaults. YaST then shows
the original proposal again.
3.14.10 Completing the Installation
After a successful installation, YaST shows the Installation Completed dialog. In this
dialog, select whether to clone your newly installed system forAutoYaST. To do so,
select Clone This System for AutoYaST. The profile of the current system is stored in
/root/autoyast.xml. Cloning is selected by default.
AutoYaST is a system for installing one or more SUSE Linux Enterprise systems auto-
matically without user intervention. AutoYaST installations are performed using a
control file with installation and configuration data. For detailed information, refer to
Chapter 5, Automated Installation (page 85). Finish the installation of SUSE Linux
Enterprise with Finish in the final dialog.

3.15 Graphical Login

TIP: IBM System z: No Graphical Login
The graphical login is not available on IBM System z platforms.
SUSE Linux Enterprise is now installed and configured. Unless you enabled the auto-
matic login function or customized the default runlevel, you should see the graphical
login on your screen in which to enter a username and password to log in to the system.
If automatic login is activated, the desktop starts automatically.
Installation with YaST 45