Novell LINUX ENTERPRISE SERVER 10 SP2 - INSTALLATION AND ADMINISTRATION Installation Manual page 436

During the conversion, the old GRUB configuration is saved to disk. To use it, simply
change the boot loader type back to GRUB and choose Restore Configuration Saved
before Conversion. This action is available only on an installed system.
NOTE: Custom Boot Loader
To use a boot loader other than GRUB or LILO, select Do Not Install Any Boot
Loader. Read the documentation of your boot loader carefully before choosing
this option.
21.3.2 Boot Loader Location
To change the location of the boot loader, follow these steps:
Procedure 21.2 Changing the Boot Loader Location
1 Select the Boot Loader Installation tab then select one of the following options
2 Click Finish to apply your changes.
418 Installation and Administration
for Boot Loader Location:
Boot from Boot Partition
The boot sector of the /boot partition.
Boot from Extended Partition
This installs the boot loader in the extended partition container.
Boot from Master Boot Record
This installs the boot loader in the MBR of the first disk (according to the
boot sequence preset in the BIOS).
Boot from Root Partition
This installs the boot loader in the boot sector of the / partition.
Custom Boot Partition
Use this option to specify the location of the boot loader manually.