Vrrp Interface Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Interface Manual

VRRP Interface Configuration

NOTE: This form is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
To display the following form, go to the Virtual Routers Configuration form. Select a VRRP interface number or
open the VRRP Interfaces folder and click Add Virtual router Interface.
The following table describes the VRRP Interface Configuration controls:
Table 162 VRRP Interface Configuration controls
Control
IP Interface (1-256)
Authentication?
Password
Descriptions
Defines the IP interface.
Defines the type of authentication that will be used:
(password authentication).
password
Defines a plain text password up to eight characters long. This password will be added to
each VRRP packet transmitted by this interface when password authentication is chosen
(see above).
Authentication
(no authentication), or
none
Configuring the switch 194