Vrrp Interface Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Reference Manual

VRRP Interface Configuration

To display the following form, go to the Virtual Routers Configuration form. Select a VRRP interface
number or open the VRRP Interfaces folder and click Add Virtual router Interface.
The following table describes the VRRP Interface Configuration controls:
VRRP Interface Configuration controls
Table 168
Control
IP Interface (1-249)
Authentication?
Password
Descriptions
Defines the IP interface.
Defines the type of authentication that will be used: none (no authentication), or
password (password authentication).
Defines a plain text password up to eight characters long. This password will be
added to each VRRP packet transmitted by this interface when password
authentication is chosen (see Authentication above).
Configuring the switch
242