Installing Your Tower; The Products - HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual

Installing Your Tower

HP J3276A
SureStore CD-ROM
Server/Tower
HP J3277A
SureStore CD-ROM
Server/Tower 7
HP J3278A
SureStore CD-ROM
Server/Tower 7Plus
SCSI Features

The Products

This tower has an HP CD-ROM server module in the top bay
and 7 empty drive bays when shipped from Hewlett-Packard.
This product is the same as J3276A above, except that the
7 drive bays have 7 high-speed HP SureStore CD-ROM drives
pre-installed by Hewlett-Packard.
This tower has an HP CD-ROM server module in the top bay,
and 7 high-speed HP SureStore CD-ROM drives pre-installed by
Hewlett-Packard. It has an expansion SCSI connector for
attaching more drives, such as the 7-bay HP C2988A SureStore
CD-ROM Tower and 7 more HP SureStore CD-ROM drives. See
"HP C2988A SureStore CD-ROM Tower" on page 2-3 for attach-
ing a 7-bay tower.
The SCSI bus is terminated at one end by the server module and
at the other end by an internal passive terminator on the back-
plane.
The SCSI IDs are set automatically on HP CD-ROM drives,
based on the position of the drives installed into the tower. You
need not set jumpers on the drives to select IDs. The topmost
drive in the tower is assigned ID 0 (zero), and the lowest drive is
assigned ID 6.
When installing drives from a vendor other than Hewlett-
Packard, the SCSI IDs for the drives must be manually set.
Universal mounting rails available from HP as the product
HP C2998A Mounting Hardware for Non-HP Drives must be
attached to adapt the drive to the HP server/tower (see page 2-
8).
Installing Your Tower 2-1
2