HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 120

Difficulty
Locating the
Server in
NetWare
Errors When
Changing
Configuration
9-10 Troubleshooting
Ethernet Frame Type Incompatibility
There are four different frame types on Ethernet networks:
Ethernet II, IEEE 802.3, IEEE 802.2, and SNAP. All four frame
types are enabled by default, and the HP CD-ROM server will
automatically detect the frame type used on the network.
Ensure that your frame type is compatible with the servers on
your network (see page 7-17).
NetWare File Server Needed
If you are unable to locate your CD-ROM server, a NetWare file
server may be required on your network.
If your configuration changes have serious errors and you cannot
succeed in changing back to a working configuration, then you
can reset the server to the factory-default condition, cycle its
power again, and then reconfigure it for your network. Use the
procedure to "Restore Factory-Default Settings" on page 9-14.
If you then cannot reinstall the server to the network suc-
cessfully, then call HP support for help in isolating the fail-
ure, as described in appendix A, "Getting Support". Or, you
can see "Isolate Network and Software Problems" on page 9-
17.