Parameter Name
[SMB]
(Windows SMB)
EnableNetBEUI
EnableNBT
EnableWINS
PrimaryWINSserver
SecondaryWINSserver
NBTscopeID
Domain/GroupName
ServerName
NetBEUIFrameType
ShowAllShares
SecurityMode
Authentication-
Domain
[NFS]
(Unix NFS)
NFSEnable
DefaultUid
PCNFSDAuthentServer
Default Value
yes
yes
yes
0.0.0.0
0.0.0.0
WORKGROUP
HP hhhhhh
auto
yes
userLevel
yes
-2
0.0.0.0
Description
Enable or disable SMB over NetBIOS/NetBEUI.
Enable or disable SMB over NetBIOS/TCP/IP .
Enable or disable WINS over NetBIOS/TCP/IP .
Primary WINS server address.
Secondary WINS server address, if required.
Defines the NetBIOS scope for the server. The
default empty string sets the default scope.
This default causes the automatic search for the
name of the server's workgroup. Or, change this
parameter to an existing workgroup or domain.
The name of the server in the Microsoft network
environment, where hhhhhh are the last 6 dig-
its of the LAN hardware (MAC) address.
If auto is set, then 802.2 or DIX will automati-
cally be set by scanning the network. If required,
set the frame type to either 802_2 or dix.
Enable or disable whether the cd, config,
root, and volumes folders are visible.
Use either share-level access (passwords set for
individual shares) or user-level access (users
authenicated against the domain controller, and
rights set individually or by group).
Name of NT domain that verifies user identities
for user-level access (SecurityMode).
A user's account must reside in this domain.
Enable or disable NFS.
Default user ID to be used when authenticating
PCNFSD clients. 0 (zero) disables it.
The Internet (IP) address of the server used for
authentication of the PC users on the UNIX
(NFS) network. 0.0.0.0 disables it.
Setup Reference for All Networks 7-15