4-16 Setup for Microsoft Networks (SMB)
Default Example: (Your entry may already have changes.)
SMBUser/Group = <DOMAIN>/Domain Users(RX)(RX)
<DOMAIN>/ remains in the entry. When the file is used, the
value for the AuthenticationDomain parameter (shown
above, and stored in the config.ini file) will be used for
<domain>.
/ appears in the file.
Domain Users must be replaced by a user or group name
on the PDC for which you will specify the rights.
RX —in the first pair of parentheses—must be replaced by
directory rights for that name. "RX", for example, assigns
read and execute rights to the user or group specified.
RX —in the second pair of parentheses—must be replaced
by file rights for that name. "RX", for example, assigns read
and execute rights to the user or group specified.
RX allowable values (for both cases) are listed below. These
rights values are cumulative, making the user's effective
rights the sum of all rights gained from direct trustee
assignments and from group memberships:
NONEspecifies no rights
Rspecifies read rights
Xspecifies execute right
Allspecifies all rights
Repeat the line of text for further user or group specifications.
Complete Example:
User/Group = <DOMAIN>/Domain Admins(All)(All)
SMB