HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 64

5-4 Setup for Novell Networks
8. This maps the administrative root access to the server. If you
wish to use this root access for the same drive letter the next
time you start your computer, check Reconnect at Logon. (If
you wish to select another level of mapping, see step 13 below.)
9. Click the OK button. The server is now ready for use.
10. Double-click the entry for your new server. The default entry
name is HP hhhhhh , where hhhhhh are the last six digits of the
server's LAN hardware (MAC) address. The name can be
changed later during configuration.
11. If you are using bindery mode, you will be prompted to enter
your user name and password, unless you are already logged
in. (Before the server has been set up, all users have full access
to it.)
12. Once you are logged in to the server, you should see the avail-
able CDs by their volume names, as well as the sys folder.
Expand sys to see the cd folder (which also contains all the
volumes).