Installing The Heatsink - HP ProLiant ML30 Gen10 Plus Maintenance And Service Manual

Installing the heatsink

Installing the heatsink
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have the following items available:
T-15 Torx screwdriver or a torque screwdriver with T-15 drill bit
Alcohol wipe
Procedure Procedure
1. Use an alcohol wipe to remove the existing thermal grease from the processor.
Allow the alcohol to evaporate before continuing.
2. Remove the thermal interface protective cover from the new heatsink.
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 73