HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 79

Server's Time
Configuration
Note
The CD-ROM server's clock has a volatile memory, so the correct
time must be set whenever the server is restarted.
Manually Configuring Date and Time
To manually configure the server's Date and Time parameters
whenever the server is restarted, set the following general
server parameters.
Parameter Name
Date
Time
If you are editing the config.ini file as your configuration
method, follow the setting with an exclamation mark.
Setting Up the Network Time Protocol
An alternative to manual configuration is automatic time syn-
chronization using the Network Time Protocol (NTP, as defined
by RFC 1769). Set these configuration parameters.
Parameter Name
TimeSyncSource
NTPServer
Setting Up NDS Time Synchronization
If you are using NetWare NDS, another alternative is to set
automatic time synchronization from a NetWare Time Server.
Set the following general server configuration parameters:
Parameter Name
TimeSyncSource
TimeZone
NDS time synchronization is normally obtains using the SAP
method. Or, if you have a Time Provider Group on your system
you can provide a list of servers for the CD-ROM server to con-
tact to obtain its time synchronization. The list can also contain
Example Value
97-06-28
14:46:30
Value Description
(a general server parameter) to set
NTP
Network Time Protocol
(an IP parameter) IP address or
For example:
Internet domain name of a server
192.4.2.30
to supply the network time.
Value Description
Set NDS to get the time from the
NDS
NetWare network.
Time zone in which the server is
For example:
operating. See the TimeZone
-8
value list on page 7-19.
Setup for Novell Networks 5-19
Description
yy-mm-dd
hh:mm:ss