HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 52

DOS
Notes
4-10 Setup for Microsoft Networks (SMB)
3. To make the connections active each time you boot up, create
or edit the startup.cmd file to include the net use command.
The CD-ROM server is mounted using the net use command,
provided that the appropriate network support is installed.
1. At the DOS prompt, enter the following:
net use <drive-letter> : \\HP hhhhhh\<path>
hhhhhh are the last six digits of the server's LAN hard-
ware (MAC) address. In the examples below, the example
full LAN hardware address used is 0060B0CD000B.
<path> is the path of the folder that provides your selected
access point on the server.
Example of root access:
net use E: \\HPcd000b\root
Example of cd folder access:
net use F: \\HPcd000b\cd
Example of CD-ROM access:
net use G: \\HPcd000b\cd_12345
2. To make the connection permanent, edit your autoexec.bat
file to include your net use command.
If you are using DOS within Windows 95/98 or Windows NT
4.0, and you wish to access file or directory names longer
than 8 characters, you will need to precede these long names
with a quote mark (
An example of changing to the directory named Product
Information:
G:\HPcd000b\CD\>cd
If you are using DOS within Windows NT , you may use the
* wildcard.
An example of quickly changing to that directory:
G:\HPcd000b\CD\>cd
).
"
"
PRODUCT INFORMATION
"
PRODUCT*