HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 95

Comment. Text that is displayed in Windows Explorer when
the user is selecting CDs.
•
In SMB, the share-level name must not exceed 12 charac-
ters. If this is insufficient, you can use the comment parame-
ter to give more information to users when configuring.
•
In NetWare, the comment is not available. However the 12-
character naming limit does not exist, so you can assign a
longer name instead of a comment.
DriveName. The manufacturer's name of the drive; cannot be
changed.
InsertedVolume. The name of the CD that is inserted; cannot
be changed.
LockEject. Locks the eject button if set to yes.
The three items above appear only in the SCSI drive access
Note
files, which are identified as id <x> lun <y> .
UserLimit. The maximum number of simultaneous users of a
CD. If it is set to 0, any number of users may access the disc.
SessionTimeout. Specifies how many seconds a user is con-
sidered to be active after the last access to the CD. When the
time has expired, another user may access the CD and perhaps
lock out the first user, depending on the UserLimit setting.
Note Items in the access control files which have a value of * have
no access restrictions. For example, * for SMBPassword
means that no password is required to access the volume.
The following notes may help you when managing access rights:
•
The identity of the drive will appear as: id <x> lun <y>
where <x> is the SCSI address and <y> the LUN address.
•
If the CD has no volume name, and an alias name has not
been assigned, the name of the disc will default to
cd_ nnnnn, where nnnnn is an unique five digit number.
•
The settings for a CD are stored even if the CD is removed.
The settings are immediately available if the CD is re-
inserted. Settings are limited to 56 CDs typically; thereafter
the oldest setting is discarded when a new CD is inserted.
•
The access settings for a CD-ROM drive will override the CD
settings for CDs in that drive, when an alias name is entered
for it; if no alias, the drive access settings are not used.
Setup Reference for All Networks 7-7