HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 100

CAUTION!
7-12 Setup Reference for All Networks
The following is an example of the general format of an
access-control file. The actual files vary depending on which
access file it is (drive, CD, or server file):
Name
Alias
Comment
DriveName
InsertedVolume
LockEject
UserLimit
SessionTimeout
SMBPassword
NetWareUser/Group = *
NFSIPAddress
NFSGroup
NFSUser
[END]
4. Change configuration settings by editing parameters in the
file. The parameters in the config.ini file are listed with
descriptions in the next section on page 7-13.
When editing the file, be sure that there is a space between
the equal sign and the parameter value. All other spaces
between names of parameters or values are ignored. Do not
remove the [END] marker from the file.
5. To activate the new settings, it will be necessary to restart the
CD-ROM server. This can be done by setting the Restart
parameter in the config.ini file to yes and saving the file.
6. Save the file you edited, to send the new settings to the server.
If you have set config.ini's Restart parameter to yes, the
server will restart. If you have not set Restart, then switch the
server's power off, wait 10 seconds, and then switch power on.
The four indicator lights on the front of the server module
will flash during the power-on sequence and self-test. When
the yellow Status indicator stops flashing and remains off,
the new settings are ready for use.
= cd_12345 ;Cannot be changed
= cd_12345
=
=
=
= no
= 0
= 0
= *
= *
= *
= *