HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 98

Using a Text
Editor to Edit
Server's Files
7-10 Setup Reference for All Networks
8. To return to the settings in place before you made changes on
a particular page, click the Reset Settings button on the
bottom of the page.
9. To keep any settings you change on a page, click the Submit
settings button at the bottom of the page to download the
changes to the corresponding file on the CD-ROM server.
10. Repeat the preceding steps for all changes needed at this time.
11. Restart the server to effect the new settings:
Click the Management and Access Rights tab; click the Gen-
eral button. Select Restart Server from the menu at left.
Click the Restart Server button, and confirm.
The yellow Status indicator light on the front of the server
module will flash during power-on sequence and self-test.
When it stops flashing and remains off, the new settings are
ready for use.
If you can locate the CD-ROM server on your network, you can
configure it using your favorite text editor in any operating envi-
ronment. The basic procedure is to view the server's file struc-
ture and open a configuration or access-control files. Then you
make changes and save the file. Saving the file sends your con-
figuration changes to the server.
The server's file structure is described in "File System
Description" on page 7-3. The file used for most configura-
tion changes is config.ini in the config folder. Other
files are used for changing access features.
Follow the procedure below to access the server's files using a
text editor. The Windows Notepad editor on a Windows 95 work-
station is used in this example.
1. Click Start, click Programs, and start Windows Explorer.
2. Locate the CD-ROM server that you want to configure. Refer
to chapter 3, 4, 5, or 6 to get access to the server on the network.