HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 47

14. Select a drive letter for your server or use the default drive
letter.
15. Check Reconnect at Logon if you wish to use the server
resource as the same drive letter the next time you start your
computer.
16. Click the OK button. The server is ready for use.
In the Microsoft network environment, network resources
Note
are accessed by specifying a server and a resource on that
server using the Universal Name Convention (UNC) as:
\\server\resource
The resource is not a file path. You may not replace the
resource name with the path to a file or folder on your CD.
Therefore, if using the file system as outlined in the "File
System Description" on page 7-3, only cd folder access would
be possible (see "Access Points" on page 7-2). However, the
server also allows you to map the following resources on
SMB clients:
• root, which includes the complete file system of the
server. Map a network drive to root for root-level access.
• cd_ nnnnn , a folder for each CD (or CD-ROM drive if an
alias name for the SCSI ID has been set). Map a network
drive letter to cd_ nnnnn to map an individual CD.
Setup for Microsoft Networks (SMB) 4-5