HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 71

Notes
Parameter Name
NDSEnable
NDSTreeName
NDSServerContext
NDSAdminName
NDSAdminPassword
NDSInstall
NDSRightsStorage
You must use either Relative Distinguished Typefull or Rel-
ative Distinguished Typeless notation for the parameters.
Examples for the NDSAdminName parameter:
Relative Distinguished Typefull notation:
CN=ADMIN.OU=DCO.O=HP
Relative Distinguished Typeless notation:
ADMIN.OU.DCO.HP
This is used in the examples in the table on page 5-11.
You can not use Distinguished Typeless or Distinguished
Typefull notation.
Example Value
yes
DCO
OU.DCO.HP
ADMIN.OU.DCO.HP
example
yes
NDS
Several minutes after the configuration changes take effect, the
server should be installed in the NDS tree, and users will be able
to access the server using NDS mode.
You must log out and then log in again to have all the necessary
rights on the server object and the associated volume.
Verify proper installation by running NetWare Administrator
(NWADMIN). The server should appear as a NetWare NDS File
server. Examine the properties in NWADMIN. The server status
should be "UP".
If the server does not appear in the NDS tree, or if it appears
but the status is down or unknown, check for error messages
in the logfile.txt file in same directory as the server's
config.ini file. Refer to "NetWare NDS Installation
Errors" on page 9-11 for corrective action for each error
message.
Description
Enable the NDS login.
Name of the tree into which to install the server.
Context into which to install the server.
Distinguished name of a user or administrator, with
Supervisor or Create rights in the context (with
Supervisor rights to Root for first installation).
The password of the administrator entered in
NDSAdminName above. After configuration is
written, password appears as ******.
Change to yes when ready to install the server, or
change to Forced, which doesn't check whether
server is already installed.
Store NDS access rights in tree.
Setup for Novell Networks 5-11