HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 68

DOS
5-8 Setup for Novell Networks
9. Select a drive letter in the Drives listing and then:
• For root access, select HP hhhhhh _NW_SYS in the
Resources list.
• For cd folder access, select the CD folder in the Resources
list.
• For CD-ROM access, select the specific CD-ROM folder
name (inside the CD folder) in the Resources list.
If you are using bindery mode, the CDs will appear at the
same level as the sys volume.
10. Click Map to map the server to the selected drive letter.
11. Click Permanent if you wish to use the server as the same drive
letter the next time you start your computer.
12. Click the Exit button on the toolbar. The server is ready for use.
The server is mounted using the map command.
1. On a NetWare file server, at the DOS prompt enter the
following:
map root < drive-letter> :=hp hhhhhh _NW/ <path>
hhhhhh are the last six digits of your server's LAN hard-
ware (MAC) address. In the examples below, the full LAN
hardware address assumed is 0060B0CD000B.
<path> is the path of the folder that provides your selected
access point on the server.
Example of root access:
map root E:=HPcd000b_NW/SYS:
Example of cd folder access:
map root F:=HPcd000b_NW/SYS:/CD
Example of CD-ROM access:
map root G:=HPcd000b_NW/SYS:/CD/cd_18881
2. To make the connection permanent, edit your autoexec.bat
file to include your map command.