HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 125

2. Select the Management and Access Rights tab in step 5 on page
7-9. in the menu on the Management page, click Restore
Factory Defaults.
3. On that page, confirm by clicking Restore Defaults. The
factory-default settings will be restored, and the server/tower
will automatically restart. If it fails to restart, try switching
the power off, waiting 10 seconds, and then switching on
power again.
Using FTP
1. Log in to the server with the command:
ftp <IP-address>/<host-name>
where <IP-address>/<host-name> is either the IP
address or the host name assigned to the server.
2. You will be prompted for user ID and password. Use the user
ID root, which has the default password pass. (root is the
user ID with the highest priority.)
3. Issue the command get defaults to restore the default
settings. The unit will then automatically restart.
4. Log out using the command quit, bye, or exit, depending on
your FTP version.
Troubleshooting 9-15