HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 51

3. From the Connection menu, select Create. The following
dialog is shown:
4. In the Workstation field, enter HP hhhhhh , where hhhhhh are
the last six digits of the server's LAN hardware address.
5. In the Share/alias field, enter the name of the server folder or
an individual CD-ROM:
• For root access, type root
• For cd folder access, type cd
• For CD-ROM access, type the specific volume name, for
example, cd_12345
6. In the Local device name field, select a drive letter to map.
7. Click Create. The server is ready for use.
Note The server folders will not be visible on the Desktop in OS/2
versions prior to OS/2 WARP Connect. If you wish to use an
earlier version of OS/2, we recommend using third-party
NFS software to connect to the server.
If you do not have IBM Peer for OS/2
The server can be mapped to a drive letter using the net use
command, as follows:
1. Open an OS/2 window.
2. At the OS/2 prompt,enter:
net use <drive-letter> : \\HP hhhhhh\<path>
hhhhhh are the last six digits of your server's LAN hard-
ware (MAC) address.
<path> is any server folder.
Setup for Microsoft Networks (SMB) 4-9