HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 72

Note
Notes
5-12 Setup for Novell Networks
We recommend that you disable bindery mode, setting the
configuration parameter BinderyEnable to no, after you have
successfully installed the server in NDS, then allow users to
logon in NDS mode only.
If NDS mode is not functioning, you can always access the
CD-ROM server in bindery mode by logging in as supervisor,
even if the parameter BinderyEnable is set to no.
Store NDS Rights in File
First identify or create a directory on an existing Novell file
server to contain the NDS access rights file.
After you set up your own access to the server from a work-
station on the network using the instructions in the previous
section, "Client Access to CDs" starting on page 5-2, you can con-
figure the server as shown in table below. Use the account of the
Admin object for the tree in which the server will reside.
You must use either Relative Distinguished Typefull or Rel-
ative Distinguished Typeless notation for the parameters.
Examples for the NDSAdminName parameter:
Relative Distinguished Typefull notation:
CN=ADMIN.OU=DCO.O=HP
Relative Distinguished Typeless notation:
ADMIN.OU.DCO.HP
This is used in the examples in the table on page 5-11.