HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 40

Disabling Access
for Other
Protocols
Server Password
3-12 Setup for IP Networks
Setting Up the Network Time Protocol
An alternative to manual configuration is automatic time syn-
chronization using the Network Time Protocol (NTP, as defined
by RFC 1769). Set these configuration parameters:
Parameter Name
TimeSyncSource
NTPServer
Or use NetWare NDS Time Synchronization (see chapter 5).
For security, you can switch off all access to the server through
other protocols for which you do not set up access restrictions, by
setting configuration parameters in this table. Use the last item
in the table if you ever want to disable all web browser HTTP
access.
Area Parameter Name
SMB EnableNetBEUI
SMB EnableNBT
NetWare NWEnable
NFS NFSEnable
IP HTTPEnable
You can change the following general server configuration
parameter:
Parameter Name
ServerPassword
Example Value Description
(a general server parameter)
NTP
to set Network Time Protocol
(an IP parameter) IP address or
Internet domain name of a server
192.4.2.30
to supply the network time.
Description
Disables access to the CD-ROM server
using SMB over NetBIOS/NetBEUI.
Disables access to the CD-ROM server
using SMB over NetBIOS/TCP/IP .
Disables access to the CD-ROM server
using NetWare.
Disables access to the CD-ROM server
using NFS.
Disables web access to the CD-ROM
server using HTTP .
Example
Description
Value
The Supervisor, Administrator, or Root
password used for protocols HTTP ,
fy98db
NetWare bindery, SMB user level,
Default: SNMP , and FTP . After the configuration
is written, the password appears as an
pass
asterisk * for each character.